How To Fix “No Internet, Secured” Wi-Fi Error?

Rate this post

Have you ever encountered an error message that reads, “No internet, secured” when you tried to connect your computer to a wireless network?

There is no need to worry, as this post contains all your information.

It is an error message many Windows users have encountered, even though it appears on all Windows operating system versions, not just Windows 10. 

The first thing that comes to mind is coming up with a long-term solution and correcting the error.

This error message indicates that the internet is down; however, it usually disappears when there is a working connection to the internet. 

However, it’s good that this issue can be resolved without specialized technical knowledge.

We have compiled a list of 15 thorough remedies that may be able to assist you in resolving the issue. 

We shall, however, begin by examining the elements that can contribute to this inaccuracy.

What Causes No Internet, Secured Error?

No Internet, Secured Error can be produced by a variety of factors, the most prevalent of which are as follows:

1. Changes In System Configurations

Suppose you have previously changed system configurations, such as IP addresses or network configurations. 

The router might become confused when you try to connect to the internet, leading to the error message.

2. Recent Windows Update

No Internet, Secured occurs due to installing patches into the Windows Operating System during updates, which causes the system files to become corrupted, resulting in the system drivers malfunctioning. The system configuration may also be modified as a result.

Fixes of No Internet, Secured After Windows Update

You can resolve this problem in several ways, depending on your network adapter, the cause of the problem, and your computer configuration.

However, if you are unsure of what caused the issue, you can experiment with the solutions listed below to find which one works best.

Restart The Computer

You may be able to fix the problem by restarting your computer. The temporary files and the cache associated with a computer are deleted when restarted. 

How To Fix No Internet, Secured Wi-Fi Error

When the computer has restarted, it may address the issue with one of these files or a driver that did not properly load.

Troubleshoot The Windows

Using a troubleshooter can assist you in resolving a variety of PC issues, including the “no internet, secured” error. 

You can identify and correct issues using the built-in troubleshooting tools in Windows 10.

You might be able to resolve the issue after you run the Windows 10 network troubleshooter and answer the questions.

To use the troubleshooter, follow these steps:

  • The Settings menu will appear if you press and hold the Windows key + I on your keyboard for a few seconds.
  • Then, under Update and Security, pick Troubleshoot from the drop-down menu.
  • When the Recommended Troubleshooting window appears, select Additional Troubleshooter, and then, under the “Get up and running” section, select the Internet Connections option and then click on Run the Troubleshooter to begin the process.
  • Select the Troubleshoot my internet connection option, and then run the following fixes as an administrator to complete the process.
  • Continually follow the instructions and respond to the questions, and the troubleshooting process should be completed in a short time

3. Disable VPN

VPN connections may also cause the issue of inaccuracy. Virtual private networks (VPNs) offer security but may interfere with your internet access.

When the VPN server goes down, this is usually caused by a kill switch located within your VPN that disconnects you from the web.

When it comes to fixing the mistake, disabling it by disconnecting its operation can be effective.

If you attempt reconnecting and can acquire access to the internet after doing so, the VPN was likely the source of the problem.

As a result, you should update your VPN software and connect to a new VPN server to prevent this issue from occurring again.

4. Ensure That All Connection Properties Are Checked

It is crucial to have a network adapter when connecting to the internet. The following connection properties must be verified if you are receiving the “no internet, secured” error:

  • Microsoft Networks client software
  • Protocol for Reliable Multicast Transmission.
  • Packet Scheduler with Quality of Service
  • File and printer sharing on Microsoft networks is a must-have feature.
  • Driver for the Microsoft LLDP Protocol
  • TCP/IPv4 is the Internet Protocol Version 4 (TCP/IPv4).
  • TCP/IPv6 is the Internet Protocol Version 6 (TCP/IPv6).
  • Responder for Topology Discovery at the Link-Layer Level
  • I/O Driver for the Link-layer Topology Discovery Mapper

To do This,

  • On the right-hand side of your screen, locate the Wi-Fi connection symbol and click on it.
  • Select Network and Internet Settings from the drop-down menu.
  • Select Wi-Fi from the Change Adapter Options menu once you have clicked on Change Adapter Options.
  • To view the connection properties, right-click on Wi-Fi and then select Properties from the context menu.
  • Click on OK to save the changes you’ve made, and then check the boxes next to them if they’re not already checked.

5. Disable And Re-enable The Network Adapter

Wifi problems can be solved with this straightforward method. Ensure that the network adapter drivers are loaded and begin to function properly by disabling (remove) and enabling (remove).

How To Fix No Internet, Secured Wi-Fi Error

Reset the network adapter by going back to the network adapter configuration page and unchecking and re-checking all connection properties. When you’re finished, restart your computer.

6. Disable The Internet Protocol Version 6 (IPv6)

You can resolve this issue by enabling IPv6 in the network adapter’s configuration settings.

To accomplish this, follow these steps:

  • A menu will appear if you right-click the Network or Wi-Fi symbol in the bottom right corner of your screen, as shown below.
  • After that, when the Network and Sharing Center appears, select Change Adapter Options from the drop-down menu.
  • When the list of network adapters appears, pick Wi-Fi and then Properties from the drop-down menu.
  • If you scroll down to the bottom of the Properties window, you should see Internet Protocol Version 6 (TCP/IPv6).
  • Changes can be saved by unchecking the checkbox in front of it and clicking on OK to apply them.
  • Restart the computer if necessary.

7. Set A New Domain Name System (DNS) Server

The domain name system (DNS) of the Internet stores domain names of websites and translates them to IP addresses.

A “no internet, secured” error is typically due to a malfunctioning DNS server, making it impossible for people to access the internet.

Here’s what you should do to solve it:

  • To locate the Internet Protocol Version 6 (TCP/IPv6), follow the first four procedures outlined above in No. 6 to the letter.
  • Double-click on the TCP/IPv6 (Transmission Control Protocol/Internet Protocol Version 6) icon.
  • Select Properties from the drop-down menu and check Make use of the DNS server addresses listed below.
  • Change your DNS server by entering the following IP addresses into your web browser:
  • DNS server with the highest priority: ( is an alternate DNS server.)
  • To proceed, click on the Ok button.

8. Update Windows Network Drivers

It is also possible to resolve network driver issues when your device displays an error message such as the “no internet, secured” problem by updating your network driver.

To get started, follow these steps:

  • Go to Applications > Device Manager after clicking on the Start button.
  • Locate and expand Network Adapter from the Device Manager window.
  • Select the wireless network device you are currently using from the Network Adapter drop-down menu and right-click it.
  • Update Driver should be selected from the context menu, and the update should begin.
  • Restart the computer after the update has been completed.

9. Disable Wi-Fi Sharing Software

Wi-Fi sharing software can cause the router to malfunction, resulting in the error. If you disable the software, the problem may be resolved.

To determine whether or not your Wi-Fi sharing software application is causing the problem,

  • Start by typing ‘run’ in the search field located under the Start button.
  • When the results are displayed, click on the dialogue box.
  • Enter the command ‘ncpa.cpl’ on your keyboard by pressing the enter key.
  • Properties can be accessed by selecting a Wi-Fi connection from the context menu.
  • Uncheck all third-party software apps on the list that are not Microsoft software and use Wi-Fi sharing if they are not Microsoft software.
  • To save your changes, click on the Save button.
  • Once the machine has been restarted, check if the error has been resolved.

10. Refresh The Windows 10 IP Configuration

This has something to do with the commands that can correct the problem. You will need to force your computer to request a new IP address from your local network to refresh the IP configuration in Windows 10. To accomplish this,

  • Simply right-click on the Start button and pick Windows PowerShell from the menu.
  • Following that, insert the comments ‘ipconfig /release’, ‘ipconfig /renew,’ ‘ipconfig /flushdns,’ and ‘netsh int IP reset in the appropriate places on the command line. After each command has been typed, press the Enter key on your keyboard to confirm it.
  • Close the window and restart the computer to complete the process.

11. Reset  Winsock

Windsock is an application programming interface (API) that allows TCP/IP applications to communicate and access network services. It specifies the method by which network applications can access these services.

Management Information System and its Types

It is one of the most common causes of connectivity issues, and rebooting the router can resolve the “No internet, Secured” error problem.

The following is the procedure for resetting Winsock:

  • Click on Start, then type ‘cmd’ into the search bar at the top of the screen.
  • When the results are available, click on Command Prompt and select Run as administrator, followed by a yes on the User Account Prompt to proceed with the installation. This should provide the software the ability to make the necessary adjustments.
  • Enter the command ‘netsh Winsock reset’ into the Command Prompt window, confirm your entry, and execute the command by pressing the Enter key on your keyboard.

Make certain that the command is typed correctly. Afterward, you’ll need to restart your computer and reconnect your Wi-Fi connection after it has completed its restart.

12. Change The Power Management Setting

There’s another possible reason why “no internet, secured” appears on your screen; the power management settings on your computer might be to blame.

It is possible to resolve the issue and connect to the internet by disabling the “enable the computer to turn off this device to save power” option.

How To Fix No Internet, Secured Wi-Fi Error

Press and hold the power button for a few seconds to adjust the power level.

  • Now, you can type ‘power’ into the search box and hit Enter.
  • You will then be able to select the “power & sleep” options from the drop-down list.
  • Search for the relevant settings on the right and select the additional power settings from the drop-down menu.
  • Select Change Plan Settings from the drop-down menu and select a plan to enable when the new window appears.
  • Change Advanced Power Settings by clicking on it and checking that the highest power saving has not been activated for Wireless Adapter Settings and Power Saving Mode under the Advanced Power Settings heading. If it has already been activated, switch it to Performance Mode by selecting it from the drop-down menu and selecting Apply.

The reason for changing the power setting is that the computer frequently turns off the wireless network to conserve energy.

13. Reset The Connection

You can also reset the internet connection to find out if the problem stems from the Wi-Fi network or the connection if you receive the message “no internet, secured.”.

It is necessary to first detach from the Wi-Fi network and then reconnect to reset the internet connection.

The following are the actions to take to reset your internet connection:

  • To access the Internet, select the Internet icon in the system tray located at the bottom right of the screen.
  • By clicking on it, you can disconnect your Wi-Fi connection.
  • Navigate to the internet network, connect, and forget about it.
  • Activate the airplane mode by double-clicking again on the Internet icon in the system tray. Then, use the same method you used to turn on aircraft mode, restart the computer and turn off airplane mode.
  • Connect the Wi-Fi network.

14. Check Antivirus

Another possible reason for the “no internet, secured” error message is your antivirus program.

The only thing you have to do to fix the problem is turn off your antivirus software and restart the computer. 

Popular Advertising Examples and Creative Campaigns

Examine your computer to confirm that the software hasn’t been reconnected after restarting.

You should replace your antivirus program if you are experiencing this issue, and it is resolved by disabling your anti-virus software.

15. Contact Microsoft Support

Microsoft has put in place a team to give support in various ways, including online chat.

They will ensure that you receive a response, whether you contact them via live chat, videos, articles, etc.

They provide a solution to the “no Internet, Secured” error or other Wi-Fi issues.


The 15 remedies listed above should allow you to resolve the “no internet, secured” error and then connect to the internet.

After attempting all of the fixes listed above and failing, check if your system is connected to a different network or if the problem is with your hardware and requires a factory reset.

Similar Posts